dragon soft
01-02-2007, 11:50 AM
بسمـ اللهـ الرحمنـ الرحيمـ
يا شباب أنا محتاج منكم وياليت ماتردوني .... أحتاجكم تترجمون لي درس فوتوشوب ....
طبعا الدرس باللغة الإنجليزيه و أبغاكم تترجمون الدرس للغة العربيه ... الدرس منقول من
منتدى أجنبي ... وأرجوكم إنكم ماتردوني .... أتفضلوا الدرس :
Step 1: Find your picture! I chose this awesome picture of Tatu ([Only registered and activated users can see links]). You can choose any picture you like, duh. Just keep in mind that the outcome will be different for different pictures depending on the colors.
Step 2: Crop, re-size, etc. to fit in a 100 x 100 pixel image. I usually make a new image of that size, then I drag the photo into the little square, and later re-size it. But it's really up to you. I hope you know how to do this, lol. Otherwise just ask! This is what it should look like ([Only registered and activated users can see links]). You can of course decide to just have Yulia's face, or whatever.
Step 3: I duplicate this layer twice ([Only registered and activated users can see links]) by going to Layer > Duplicate Layer. For some reason it didn't allow me to take a screenshot of this. [Only registered and activated users can see links] If you can't see your layers palette, go to Window > Layers.
Step 4: I choose the first duplicate and change the layer style to Screen 100% ([Only registered and activated users can see links]).
Step 5: I then choose the second duplicate and change the layer style to Soft Light 100% ([Only registered and activated users can see links]).
Are you with me so far? That's not too bad, is it? [Only registered and activated users can see links]
Step 6: I go to Layer > New Adjustment Layer > Selective Color. I type in these settings ([Only registered and activated users can see links]).
Reds
Cyan -100
Magenta +10
Yellow +60
Then, without closing the window, I choose Yellows from the scroll-down menu. I marked this in red so that it would be easier to get what I mean ([Only registered and activated users can see links]). I then proceed to type in these settings (as shown in the pic).
Yellows (this is what we just changed to, get it?)
Cyan +100
Magenta -10
Yellow -30
I click on the scroll-down menu again and choose neutrals this time ([Only registered and activated users can see links]). Like the picture tells us, I chose these settings:
Neutrals
Cyan +85
Magenta -10
Yellow -60
Yay, we are so awesome, aren't we?
This is what the avatar looks like so far. ([Only registered and activated users can see links]) Nice, but not nice enough!
Step 7: Now it's time to create a new layer. If you look at your layer palette, this is what it should look like ([Only registered and activated users can see links]). I also drew a smiley and a pointer on where you should click to create a new layer. I'm so nice. [Only registered and activated users can see links]
Awesome, now we have a new layer. ([Only registered and activated users can see links]) You can name these layers stuff, but mine is just called Layer 2.
Step 8: Now it's time to whip out the Paint Bucket! ([Only registered and activated users can see links]) I circled it in with red so you know which one it is.
Step 9: This might be tricky, because I made it look tricky. In real life, it's easy-peasy. After choosing the paint bucket, I double click on the colored-in square ([Only registered and activated users can see links]). A window then pops up. Yes, this is the window on the picture. What we do then, is, we type in the code for the color, in the little box. As you can see, it is 2497e1.
Step 10: Fill in the layer with the paint bucket tool after selecting this color. Just click anywhere on the photo, making sure that your new layer is selected (It should be.)
Ouch, this is what our avatar looks like now! ([Only registered and activated users can see links]) Not too good. I mean, you can't even see our girls. Just a whole lot of blue.
Step 11: BUT! We change this. And this is how ([Only registered and activated users can see links]). I go to my layers palette, make sure that the blue layer is selected, and change the settings to Soft light, 50% ([Only registered and activated users can see links]).
I admire my almost-finished avatar. ([Only registered and activated users can see links]) We've come a long way now. I make some tea and put on some lipbalm.
Step 12: I create yet another layer ([Only registered and activated users can see links]).
And with the same technique, I fill it in ([Only registered and activated users can see links]). This time I fill it in with the color e1aca9. As you can see, I have also changed the layer settings to Multiply, 50%. You should know how to fill it in etc., because I just taught you how! And I hope you were paying attention. [Only registered and activated users can see links]
Now it should look something like this ([Only registered and activated users can see links]). Now that is just too hot for the universe.
But it will get even hotter!
Step 13: Again, a new layer ([Only registered and activated users can see links]). I fill it in with cfc4e1 and change the layer style to Color Burn, 50%.
Okay, almost done! Time to flatten the image! This is how we do it...
Step 14: In our layers palette, there is a tiny button. This is the button ([Only registered and activated users can see links]). Once you press that, you get a menu. From this menu, choose "Flatten image". I couldn't get a screenshot of this, because Photoshop doesn't like me.
Yay! Now our layers are packed together, and our image is ^~*CoMpLeTe*~^ ([Only registered and activated users can see links])
This is what it looks like! BREATHTAKING. ([Only registered and activated users can see links]) But it's a bit blurry!
Step 15: In order to Sharpen it, I go to Filter > Sharpen > Sharpen. Ouch, it's *too* sharp now, so let's move over to Edit > Fade Sharpen! I used these settings ([Only registered and activated users can see links]) (20%).
أرجوكم أسرعوا في ترجمة الدرس لأني محتاجه ضروري ... الله يوفقكم ترجموه :cry4:
يا شباب أنا محتاج منكم وياليت ماتردوني .... أحتاجكم تترجمون لي درس فوتوشوب ....
طبعا الدرس باللغة الإنجليزيه و أبغاكم تترجمون الدرس للغة العربيه ... الدرس منقول من
منتدى أجنبي ... وأرجوكم إنكم ماتردوني .... أتفضلوا الدرس :
Step 1: Find your picture! I chose this awesome picture of Tatu ([Only registered and activated users can see links]). You can choose any picture you like, duh. Just keep in mind that the outcome will be different for different pictures depending on the colors.
Step 2: Crop, re-size, etc. to fit in a 100 x 100 pixel image. I usually make a new image of that size, then I drag the photo into the little square, and later re-size it. But it's really up to you. I hope you know how to do this, lol. Otherwise just ask! This is what it should look like ([Only registered and activated users can see links]). You can of course decide to just have Yulia's face, or whatever.
Step 3: I duplicate this layer twice ([Only registered and activated users can see links]) by going to Layer > Duplicate Layer. For some reason it didn't allow me to take a screenshot of this. [Only registered and activated users can see links] If you can't see your layers palette, go to Window > Layers.
Step 4: I choose the first duplicate and change the layer style to Screen 100% ([Only registered and activated users can see links]).
Step 5: I then choose the second duplicate and change the layer style to Soft Light 100% ([Only registered and activated users can see links]).
Are you with me so far? That's not too bad, is it? [Only registered and activated users can see links]
Step 6: I go to Layer > New Adjustment Layer > Selective Color. I type in these settings ([Only registered and activated users can see links]).
Reds
Cyan -100
Magenta +10
Yellow +60
Then, without closing the window, I choose Yellows from the scroll-down menu. I marked this in red so that it would be easier to get what I mean ([Only registered and activated users can see links]). I then proceed to type in these settings (as shown in the pic).
Yellows (this is what we just changed to, get it?)
Cyan +100
Magenta -10
Yellow -30
I click on the scroll-down menu again and choose neutrals this time ([Only registered and activated users can see links]). Like the picture tells us, I chose these settings:
Neutrals
Cyan +85
Magenta -10
Yellow -60
Yay, we are so awesome, aren't we?
This is what the avatar looks like so far. ([Only registered and activated users can see links]) Nice, but not nice enough!
Step 7: Now it's time to create a new layer. If you look at your layer palette, this is what it should look like ([Only registered and activated users can see links]). I also drew a smiley and a pointer on where you should click to create a new layer. I'm so nice. [Only registered and activated users can see links]
Awesome, now we have a new layer. ([Only registered and activated users can see links]) You can name these layers stuff, but mine is just called Layer 2.
Step 8: Now it's time to whip out the Paint Bucket! ([Only registered and activated users can see links]) I circled it in with red so you know which one it is.
Step 9: This might be tricky, because I made it look tricky. In real life, it's easy-peasy. After choosing the paint bucket, I double click on the colored-in square ([Only registered and activated users can see links]). A window then pops up. Yes, this is the window on the picture. What we do then, is, we type in the code for the color, in the little box. As you can see, it is 2497e1.
Step 10: Fill in the layer with the paint bucket tool after selecting this color. Just click anywhere on the photo, making sure that your new layer is selected (It should be.)
Ouch, this is what our avatar looks like now! ([Only registered and activated users can see links]) Not too good. I mean, you can't even see our girls. Just a whole lot of blue.
Step 11: BUT! We change this. And this is how ([Only registered and activated users can see links]). I go to my layers palette, make sure that the blue layer is selected, and change the settings to Soft light, 50% ([Only registered and activated users can see links]).
I admire my almost-finished avatar. ([Only registered and activated users can see links]) We've come a long way now. I make some tea and put on some lipbalm.
Step 12: I create yet another layer ([Only registered and activated users can see links]).
And with the same technique, I fill it in ([Only registered and activated users can see links]). This time I fill it in with the color e1aca9. As you can see, I have also changed the layer settings to Multiply, 50%. You should know how to fill it in etc., because I just taught you how! And I hope you were paying attention. [Only registered and activated users can see links]
Now it should look something like this ([Only registered and activated users can see links]). Now that is just too hot for the universe.
But it will get even hotter!
Step 13: Again, a new layer ([Only registered and activated users can see links]). I fill it in with cfc4e1 and change the layer style to Color Burn, 50%.
Okay, almost done! Time to flatten the image! This is how we do it...
Step 14: In our layers palette, there is a tiny button. This is the button ([Only registered and activated users can see links]). Once you press that, you get a menu. From this menu, choose "Flatten image". I couldn't get a screenshot of this, because Photoshop doesn't like me.
Yay! Now our layers are packed together, and our image is ^~*CoMpLeTe*~^ ([Only registered and activated users can see links])
This is what it looks like! BREATHTAKING. ([Only registered and activated users can see links]) But it's a bit blurry!
Step 15: In order to Sharpen it, I go to Filter > Sharpen > Sharpen. Ouch, it's *too* sharp now, so let's move over to Edit > Fade Sharpen! I used these settings ([Only registered and activated users can see links]) (20%).
أرجوكم أسرعوا في ترجمة الدرس لأني محتاجه ضروري ... الله يوفقكم ترجموه :cry4: